Abstract：The observation on the outcrop in the field is one of the most direct and efficient methods to obtain the underground formation information, which provides the most direct first-hand geological data for geological science research. However, the traditional outcrop investigation, especially for the outcrop with a large slope and unreachable area, mainly relies on the inspection, measurement of the slope bottom, and photos to record outcrop information, making it difficult to accurately characterize the whole geological body. Consumer unmanned aerial vehicle (UAVs) with the advantages of good mobility, strong adaptability and low cost, can obtain outcrop images from a short distance, multiple perspectives and varying heights. In this paper, the image acquisition method and model construction accuracy without control points available for the geological outcrop with a large slope are discussed. Consumer UAVs is used to capture images through vertical route and then the geological model is set up. The results show that oblique photogrammetry technology combined with consumer UAVs can effectively build a large slope geological outcrop model with millimeter resolution. The model has the characteristics of high resolution, uniform resolution and high measurement accuracy up to millimeter, which can effectively reduce the difficulty of field investigation and the personnel safety risk, thus it accurately reproduces the outcrop situation with large slope in the field, providing a real and reliable data basis for the section interpretation, analysis and measurement of large slope outcrop.
Sheng Hui,Duan Zheng-Ming,Liu Shan-Wei et al. High resolution UAV image acquisition method and modeling practice for geological outcrop with a large slope[J]. JOPC, 2020, 22(4): 799-806.
[1] 刘学锋,马乙云,曾齐红,邵燕林,张友焱,叶勇. 2015. 基于数字露头的地质信息提取与分析: 以鄂尔多斯盆地上三叠统延长组杨家沟剖面为例. 岩性油气藏, 27(5): 13-18. [Liu X F,Ma Y Y,Zeng Q H,Shao Y L,Zhang Y Y,Ye Y.2015. Geological information extraction and analysis based on digital outcrop: A case of Yangjiagou section of the Upper Triassic Yanchang Formation in Ordos Basin. Lithologic Reservoirs, 27(5): 13-18] [2] 刘策,于炳松,蒋锐,谭聪,罗忠,刘润达. 2017. 湖盆重力流沉积特征及模式: 以鄂尔多斯盆地及滦平盆地为例. 地质科技情报, 36(5): 133-142. [Liu C,Yu B S,Jiang R,Tan C,Luo Z,Liu R D.2017. Sedimentary feature and mode of gravity flow in lacustrine basin: Example from Ordos Basin and Luanping Basin. Geological Science and Technology Information, 36(5): 133-142] [3] 邱亚辉,郎博,薄志毅,刘文龙. 2019. 三维激光扫描仪高度对地面点云数据质量的影响. 测绘通报,(S1): 163-167. [Qiu Y H,Lang B,Bo Z Y,Liu W L.2019. Influence of height of 3D laser scanner on data quality of ground point clouds. Bulletin of Surveying and Mapping,(S1): 163-167] [4] 万剑华,王朝,刘善伟,任启强,冯建伟. 2019. 倾斜摄影测量构建地质数字露头. 地质科技情报, 38(1): 258-264. [Wan J H,Wang C,Liu S W,Ren Q Q,Feng J W.2019. Reconsting geological digital outcrops with oblique photogrammetry. Geological Science and Technology Information, 38(1): 258-264] [5] 王柳,黄鹤,李若鹏,赵冬旭. 2017. 消费级无人机倾斜影像采集关键技术研究. 测绘通报,(S1): 41-45. [Wang L,Huang H,Li R P,Zhao D X.2017. Study on key technology of oblique image acquisition for consumer unmanned aerial vehicle. Bulletin of Surveying and Mapping,(S1): 41-45] [6] 吴波涛,张煜,李凌霄,魏思奇,田一. 2016. 基于多旋翼单镜头无人机的三维建模技术. 长江科学院院报, 33(11): 99-103. [Wu B T,Zhang Y,Li L X,Wei S Q,Tian Y.2016. Key technology of oblique images acquisition using single-lens multicopter. Journal of Yangtze River Scientific Research Institute, 33(11): 99-103] [7] 吴熠文,余加勇,陈仁朋,晏班夫. 2018. 无人机倾斜摄影测量技术及其工程应用研究进展. 湖南大学学报(自然科学版),45(S1): 167-172. [Wu Y W,Yu J Y,Chen R P,Yan B F.2018. Research development of unmanned aerial vehicle-based oblique photogrammetry and its engineering applications. Journal of Hunan University(Natural Sciences),45(S1): 167-172] [8] 武法东,陈永进,侯宇安,张峰,李寅. 2004. 滦平盆地沉积-构造演化及高精度层序地层特征. 地球科学,29(5): 625-630. [Wu F D,Chen Y J,Hou Y A,Zhang F,Li Y.2004. Characteristics of sedimentary-tectonic evolution and high-resolution sequence stratigraphy in luanping basin. Earth Science, 29(5): 625-630] [9] 杨润书,马燕燕,殷海舟. 2013. 低空无人机航摄系统地面分辨率与航高的关系研究. 地矿测绘, 29(3): 1-2. [Yang R S,Ma Y Y,Yin H Z.2013. Relationship between ground resolution and flying height about the low altitude unmanned aerial vehicle aerophotographic system. Surveying and Mapping of Geology and Mineral Resources, 29(3): 1-2] [10] 印森林,谭媛元,张磊,冯伟,刘善勇,晋静. 2018. 基于无人机倾斜摄影的三维露头地质建模: 以山西吕梁市坪头乡剖面为例. 古地理学报, 20(5): 909-924. [Yin S L,Tan Y Y,Zhang L,Feng W,Liu S Y,Jin J.2018.3D outcrop geological modeling based on UAV oblique photography data: A case study of Pingtouxiang section in Lüliang City,Shanxi Province. Journal of Palaeogeography(Chinese Edition), 20(5): 909-924] [11] 余忠迪,李辉,巴芳,王朝阳. 2018. 基于消费者级无人机的城市三维建模. 国土资源遥感, 30(2): 67-72. [Yu Z D,Li H,Ba F,Wang C Y.2018.3D city model construction based on a consumer-grade UAV. Remote Sensing for Land & Resources, 30(2): 67-72] [12] 朱凌,石若明. 2008. 地面三维激光扫描点云分辨率研究. 遥感学报, 12(3): 405-410. [Zhu L,Shi R M.2008. Research on the point cloud resolutions of TLS. Journal of Remote Sensing, 12(3): 405-410] [13] Furukawa Y,Ponce J.2010. Accurate,dense,and robust multiview stereopsis. IEEE Transactions on Pattern Analysis and Machine Intelligence, 32(8): 1362-1376. [14] Labatut P,Pons J P,Keriven R.2007. Efficient multi-view reconstruction of large-scale scenes using interest points,delaunay triangulation and graph cuts. In: 2007 IEEE 11th International Conference on Computer Vision. 1-8. [15] Zhang Z.1999. Flexible camera calibration by viewing a plane from unknown orientations. In: 7th IEEE International Conference on Computer Vision. 666-673.
